Hi,
I have received the information that there is an additional requirement in US due to demands of OSHA concerning working safety, which might result in necessary changes in documentation. Does anybody confirm that? In which regulation is that new requirement published? Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist _________________________________________ Globalnorm GmbH Kurfürstenstr. 112 10787 Berlin Fon +49 30 3229027-51 Mobile +49 170 3229027 Fax +49 30 3229027-59 Mail <mailto:[email protected]> [email protected] <http://www.globalnorm.de/> www.globalnorm.de _________________________________________ Globalnorm GmbH, Sitz der Gesellschaft: Kurfürstenstr. 112, 10787 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
