It certainly depends on how you rate the product, and what "ratings" really means. Typically the voltage rating would be marked on the nameplate of the product, but some agencies will go look in the often embellished specifications in the operator manual for the voltage range.
Some auto-ranging power supplies mark the a.c. input as a list of nominal voltages, as in "100/120/220/240V". _______________________________________________________________________________ Ralph McDiarmid | Schneider Electric | Solar Business | CANADA | Regulatory Compliance Engineering From: Brian Oconnell <[email protected]> To: [email protected], Date: 12/03/2012 08:55 AM Subject: Re: [PSES] IEC 60601-1-2 autoranging supplies Rated by test certificate and CB report, or by the sales dept-infected spec sheet? That is, what is the rating on the unit's label? You can configure most variacs to provide well above the input voltage, but this may do strange stuff to the source impendence. Use a really really really big variac, or use an electronic source (Ametek, Chroma, etc). Brian -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of David Sent: Monday, December 03, 2012 8:21 AM To: [email protected] Subject: IEC 60601-1-2 autoranging supplies All, IEC 60601-1-2 requires surge, burst, and dropouts be done at the maximum and minimum rated voltages for autoranging supplies. We typically test at 90 Vac and 240 Vac. Many supplies I see now are rated up to 264 Vac though. Is anyone testing at 264V? Are there variacs out there to bump the input voltage, since our generator can't go much above 240? Thanks, David - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
