John Many Thanks - we will try to get a copy of IEC61984 and study it in detail.
John Allen -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Woodgate Sent: 29 January 2013 16:18 To: [email protected] Subject: Re: Test Voltages for secondary circuit creepage distances IEC/EN 61010:2010 section 6.7.3 In message <[email protected]>, dated Tue, 29 Jan 2013, John Allen <[email protected]> writes: >You kindly helped me a few months ago on the changes between Ed 2 & Ed >3 of the standard, and we have been getting into it in quite a lot of >detail in my new contract job ? but we have run up against a specific >issue which is puzzling us a lot, as raised below by my colleague Peter >Phillips. It may be wrong to apply 61010 to a connector, as they have their own safety standard, IEC 61984. It depends on whether 61010 explicitly claims to apply to connectors. We have met this issue before, with other product standards: they don't take into account that there are special issues with connectors. -- OOO - Own Opinions Only. See www.jmwa.demon.co.uk Analogue is the limiting case of digital, with infinite sampling rate and number of bits. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
