I seem to recall, being at home and not able to access the doc's, that a notice of Class A restrictions from being installed in residential areas (Class B) needs to be on the outside of box for the consumer to find before buying. Finding that fact after purchase by reading the inside documents is so annoying!
>________________________________ > From: "Crane, Lauren" <[email protected]> >To: Jim Hulbert <[email protected]>; "[email protected]" ><[email protected]> >Sent: Wednesday, February 13, 2013 5:44 PM >Subject: RE: Class A or Class B on Declaration of Conformity > > > >The directive requires >“a dated reference to the specifications under which conformity is declared to >ensure the conformity of the apparatus >with the provisions of this Directive” > >The EMC guidance document says >“In most cases, the dated references to the specifications under which >conformity is declared, will be those of the European harmonised >standards that are applicable to the apparatus in question as listed in the >OJEU. If European harmonised standards have not been used or only >partially, a reference to the manufacturer’s technical documentation needs >to be included and a reference to any identifiable non-harmonised >standards or specifications that have been applied.” > >There is no hint that you must include the granularity of A or B, just the >gross, dated reference of the specification used (EN 12345-2:2010). > >Regards, >Lauren Crane >KLA-Tencor > >From:Jim Hulbert [mailto:[email protected]] >Sent: Wednesday, February 13, 2013 4:02 PM >To: [email protected] >Subject: [PSES] Class A or Class B on Declaration of Conformity > >On CE Declarations of Conformity, where EN 55022 standard has been referenced, >is it a requirement that the limit that was applied (class A or class B) also >be stated? We show the limit on our DoCs, but some of our OEMs do not. I >can’t find where it is actually required. > >Jim Hulbert > > > >________________________________ > > >- >---------------------------------------------------------------- >This message is from the IEEE Product Safety Engineering Society emc-pstc >discussion list. To post a message to the list, send your e-mail to ><[email protected]> >All emc-pstc postings are archived and searchable on the web at: >http://www.ieee-pses.org/emc-pstc.html >Attachments are not permitted but the IEEE PSES Online Communities site at >http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used >formats), large files, etc. >Website: http://www.ieee-pses.org/ >Instructions: http://listserv.ieee.org/request/user-guide.html >List rules: http://www.ieee-pses.org/listrules.html >For help, send mail to the list administrators: >Scott Douglas <[email protected]> >Mike Cantwell <[email protected]> >For policy questions, send mail to: >Jim Bacher <[email protected]> >David Heald <[email protected]> - >---------------------------------------------------------------- > >This message is from the IEEE Product Safety Engineering Society emc-pstc >discussion list. To post a message to the list, send your e-mail to ><[email protected]> >All emc-pstc postings are archived and searchable on the web at: >http://www.ieee-pses.org/emc-pstc.html >Attachments are not permitted but the IEEE PSES Online Communities site at >http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used >formats), large files, etc. >Website: http://www.ieee-pses.org/ >Instructions: http://listserv.ieee.org/request/user-guide.html >List rules: http://www.ieee-pses.org/listrules.html >For help, send mail to the list administrators: >Scott Douglas <[email protected]> >Mike Cantwell <[email protected]> >For policy questions, send mail to: >Jim Bacher <[email protected]> >David Heald <[email protected]> > > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
