We have client that would like to have a local consultant perform a review and issue a report on a piece of industrial machinery for Australian safety requirements.
The unit has been evaluated in the US the applicable standards would be UL 775, B65.1. the equipment has also been evaluated for European requirements for the Machinery Directive to EN 60204-1, EN 1010-1, EN 1010-2 and the EMC Directive to EN 61000-6-3, EN 61000-6-2. The Australian review is to identify any gaps between the US and European requirements with respect to Australian safety requirements. If anyone has the experience or knows of someone with the experience to conduct this evaluation please contact me offline. Thanks John E. Yelencich VP Engineering, CTO Product Safety Consulting, Inc. 605 Country Club Drive Suites I & J Bensenville, IL 60106 630-238-0188 Ext. 20 [email protected]<mailto:[email protected]> www.productsafetyinc.com<http://www.productsafetyinc.com/> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
