Hello Group, Does anyone know what would be the correct standard for evaluation of HV generator for industrial X-Rays?
HV generator is comprised of oil immersed HV generator and cascade circuit. Output is 85kV and 2500VA. I found standard EN 50299 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV but I am not sure if it is the right one for cable. I checked on the web and some manufacturers are referring to EN 61010-1 standard, but this standard goes only up to 60kV. How to evaluate distances for 85kV? What it means if transformer is immersed in oil with regards of calculation of required cl/crd distances? Thank you for your support. Best regards, Bostjan Boštjan Glavič Vodja laboratorija, Laboratorij za elektroniko Head of Laboratory, Laboratory of Electronic Engineering Laborleiter, SIQ GmbH SIQ Ljubljana, Trzaska c. 2, SI-1000 Ljubljana, Slovenia, VAT ID: SI23509678 t +386 (0)1 4778 265, m +386 (0)41 391 283, f +386 (0)1 4778 444 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
