Dear Members, Could you please share your suggestions/comments to connect the above-referenced LISN ( http://www.rohde-schwarz.com/en/product/env216-productstartpage_63493-9775.html) to reference ground in a semi-anechoic chamber (mainly for radiated emission measurement) where a 2mx2m vertical ground plan only moved in for AC power line conducted emission measurement?
Section 3.6 of the instrument manual indicates "The reference ground used can be attached flat to the grounding rail (2) on the side of the device by a broad sheet metal with three metric M4 screws (1)." An example of reference ground connection "B" is shown in a diagram under Section 3.10. There is some difficulty to follow the instructions in a semi-anechoic chamber. I look forward to hear from you. Setup photos are of great help. You may wish to reply offline. Thank you very much. Best regards, Grace Lin - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
