We purchased and have been using the emtest UCS 500N Surge/Burst generator and CN 503 three phase coupler for about a year and a half now. The hardware is very impressive and it has been working flawlessly. Easy to setup and use. We write our own test software so I cannot comment on their software. You can run the test from the front panel very easily without software anyway. Emtest provided us with a programming guide and supported us well with any question we had. They get a thumbs up from us.
The Other Brian From: [email protected] [mailto:[email protected]] On Behalf Of Grace Lin Sent: Friday, March 29, 2013 7:57 AM To: [email protected] Subject: emtest CWS 500N1 Continuous Wave Simulator, 80W Dear Members, I am asked to look into the above-referenced instrument for 61000-4-6 (10V) conducted immunity application. At this time, I have no knowledge of this manufacturer and instrument. If you do, could you please share, good or bad (offline)? Is there any parameter/specification that I have to be aware of ? Thank you very much and look forward to hearing from you. Best regards, Grace Lin - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
