*From:* Peter Merguerian [mailto:[email protected]] *Sent:* Tuesday, April 09, 2013 08:23
I also do not think you will get variations in impedance results if you test inject a current of 5 A, 10 A or as I have seen a manufacturer do it at 40A Peter – When performing a 40 A test in my prior labs, I’ve seen the voltage drop across the tested current path change with time, mostly due to heating effects. Less heating necessarily leads to a lesser resistance value, since resistance of any conductor is dependent on its temperature. Peter Tarver This email message is for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. If you are not an intended recipient, you may not review, use, copy, disclose or distribute this message. If you received this message in error, please contact the sender by reply email and destroy all copies of the original message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
