Fellow Listers, Been a long time since I had a product for ITE safety to 60950-1. I know there have been changes since my last effort.
The product is ITE and powered by an EPS at 12V DC, 24W. Normally I would say safety is not required for the product, only for the EPS. But this product can also be powered by POE. Question is, does the addition of POE bring any requirements that would require the product be sent out for safety testing? Or can I still declare the product does not need safety testing? The EPS will, of course, have any and all necesary safety and ErP approvals met. Markets are US, Canada, EU to start with. As always, any comments are appreciated. Best regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
