I can definitely vouch for ETS as we purchased multiple chambers, support equipment and integration from them and the installation and schedule was flawless.
Best Regards, Jody Leber Consumer Testing Services Global Battery and Accumulator Technical Manager Battery, Energy Efficiency and Safety Laboratory Manager Direct: 770.570.1838 Main: 770.570.1800 Mobile: 678.469.9835 -----Original Message----- From: Ray, Darryl P [mailto:[email protected]] Sent: Tuesday, June 04, 2013 2:03 PM To: [email protected] Subject: Re: [PSES] RFI on chamber vendors Hi All, Add to the list TDK for chambers. I have had opportunity to work with all of them in the past building shielded rooms, compact chambers, 5m and 10m chambers. They all have their plus and minus. As far as "turnkey" goes, be careful. It's one thing to get the chamber, shield rooms, etc. to be built. But it's a completely different challenge to integrate all of the test equipment, test software, performed the NSA and immunity calibrations, etc. It can takes months for the emissions and immunity test setups to be up and running. But once it's completed, you know what you have and how to fix it when something goes wrong (and it will). If others setup it up, you do not get the carnal knowledge of how things work and you will run the risk of getting stranded until someone else is available to fix it. Cheers, Darryl Darryl P. Ray iNarte Certified Master EMC Design Engineer Manager, EMC Compliance Covidien Respiratory & Monitoring Solutions 2101 Faraday Ave. Carlsbad, CA 92008 +1 (760) 603-5882 (Office) +1 (760) 208-0805 (Cell) NEW [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kunde, Brian Sent: Tuesday, June 04, 2013 5:50 AM To: Curt McNamara; EMC-PSTC Subject: RE: RFI on chamber vendors If you are looking at something new then Panashield and ETS Lindgren are a must to check with. I understand Rohde & Schwarz is aggressively getting into the chamber market so I would check with them as well. Each of these companies can provide turnkey systems for whatever testing you are looking to do. Otherwise, there are so many factors it would be difficult for any of us to recommend equipment unless you can provide us with more information. The Other Brian -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Curt McNamara Sent: Monday, June 03, 2013 5:15 PM To: EMC-PSTC Subject: RFI on chamber vendors A customer I work with is asking about EMC chambers for investigation/debug of unintentional radiation (not for official testing). Sounds like something in the 3M range, up to 6 GHz. Who do I talk to? Want a potential range of costs. It would go into an existing building. Equipment is a separate item, however interested in recommendations on that as well. Thanks! Curt - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> ________________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. The Company accepts no liability for any damage caused by any virus transmitted by this email. All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
