On Tue, 11 Jun 2013 10:14:57 -0700 (PDT), Bill Owsley <[email protected]> wrote:
> electrically conductive and thermally insulative material to use as a gasket. Nothing is perfect, so I think you need to specify how high electrical conductivity and how low thermal conductivity the material should have. If you simply need thermal resistance much higher than metals, conductive rubbers may have moderately high electrical conductivity and relatively low thermal conductivity. For example, Shinetsu Silicorn EC-BL conductive silicorn rubber has thermal conductivity of 0.38 W/(m.K), which is much lower than that of metals such as aluminium (around 200 W/(m.K)) and stainless steel (around 20 W/(m.K)). Regards, Tom -- Tomonori Sato <[email protected]> URL: http://homepage3.nifty.com/tsato/ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
