D1 -> Article 725 of NEC would apply to Class 2/LPS materials, where not used with haz-V stuff.
Did ya read anx NAE of the std? Read any good SciFi noves lately? Brian -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Boštjan Glavič Sent: Thursday, July 11, 2013 1:00 PM To: [email protected] Subject: Secondary cable Dear experts, Does anyone know if it is required to use approved secondary cable on a direct plug-in power supply, where output meets limited power source (also meets class 2 according to UL1310). Power supply is intended for US/CAN market and it tested according to UL/CSA 60950-1. There is mentioned something in clause 1.5.5, but it is not clear for me. Is it enough that material used complies with VW-1 or FT-1 or complete cable needs to be certified? Is it enough to use normal PVC cable? - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
