Hi Curt, I wonder if it might be more cost effective to simply construct a "shield room" from 2x4 boards and hardware cloth (you know, that metal mesh with 1/4'inch grid)? If you need filtered line voltage, it would be a lot easier to mount a filter on the hardware cloth than onto shielded fabric. I once tested the shielding effectiveness of one of those tents by comparing the ambient signals inside versus outside the tent with a portable spec-an and it was OK, but not great. We determined there was a lot of leakage due to the line filter not contacting the fabric well enough.
Cheers, Ken _______________________ Kenneth Wyatt Wyatt Technical Services LLC 56 Aspen Dr. Woodland Park, CO Phone: (719) 310-5418 / Toll Free: (877) 443-9275 Email Me! | Web Site | Blog The EMC Blog (T&M World) Subscribe to Newsletter Connect with me on LinkedIn On Aug 1, 2013, at 2:28 PM, Curt McNamara wrote: > We are looking for a 4' cube (or 1.3m cube) RF tent. Anyone have one or know > of a source? > > Thanks! > > Also -- thanks a ton for all the responses with regards to chambers. We got > industry contacts and recommendations that were very useful. > > Curt > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
