Dear all, Is anyone familiar with above mentioned standard?
I need information about distances to dead metal enclosure. Standard requires huge distances from primary live parts to dead metal enclosure but there is no definition of dead metal enclosure in the standard. Is earthed enclosure considered as dead metal enclosure? Best regards, Bostjan Boštjan Glavič Safety and Electromagnetics Laboratory of Electronic Engineering Head of Laboratory SIQ, Tržaška cesta 2 SI-1000 Ljubljana, Slovenia T: + 386 (0)1 47 78 265 F: + 386 (0)1 47 78 444 E-Mail: [email protected]<mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
