HI Ken,
this has a dc requirement for loads greater than 400 Watts, but not less like most avionics boxes. UNless I missed something. Seems like something is missing to me.. Cheers, Derek. -----Original Message----- From: Ken Javor <[email protected]> To: EMC-PSTC <[email protected]> Sent: Mon, Sep 9, 2013 11:57 pm Subject: Re: [PSES] AF ripple in DO-160 Derek, Check out section 16.7 control on current ripple ac/dc, power factor, harmonic current. Ken Javor Phone: (256) 650-5261 From: Derek Walton <[email protected]> Reply-To: Derek Walton <[email protected]> Date: Mon, 9 Sep 2013 23:22:35 -0400 To: <[email protected]> Subject: [PSES] AF ripple in DO-160 Hi Folks, the DO-160G conducted emissions limits begin at 150 kHz, I'm curious if there are other controlling documents that restrict emissions below 150? I believe Boeing does, and so does Airbus, but with DO-160 I don't see it. I must have dozed through this discussion.... Insight would be most welcome. Sincerely, Derek Walton L F Research EMC facility. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at:http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
