On Tue, 17 Sep 2013 15:52:05 +0000, Bill Stumpf <[email protected]> wrote:
> The FCC will accept testing using ANSI C63.4:2009 also. See FCC DA-09-2478. And ICES-003 Issue 5 may still accept ANSI C63.4-2003, too. See footnote 2, which says "Until further notice the use of ANSI C63.4-2003 is permitted in lieu of the latest edition of ANSI C63.4." Regards, Tom -- Tomonori Sato <[email protected]> URL: http://homepage3.nifty.com/tsato/ > From: Ian McBurney [mailto:[email protected]] > Sent: Tuesday, September 17, 2013 10:35 AM > To: [email protected]<mailto:[email protected]> > Subject: [PSES] USA & Canada rf emission test standards > > Dear Colleagues; > > I am trying to combine FCC 47 CFR part 15 and Canadian ICES-003:2012 radiated > rf emission testing for a digital device that is an unintentional radiator. > However; looking into the test standards for each country I am getting > perplexed. > > It appears that for 47 CFR part 15 sub part B, the test standard for > compliance is ANSI UL C63.4 2003 whereas for Canada it is the latest edition > that is acceptable which I believe is the ANSI UL C63.4 2009. > Similarly; if I was to apply the CISPR 22 method then CFR47 part 15 > recognises the third edition of CISPR 22 and Canada applies the 6 edition > 2008. > > Is there a common set of standards that can be applied for radiated & > conducted rf emission measurements that is acceptable in both the USA & > Canada? > > I am carrying out measurements from 30MHz to 2GHz to class B limits. > > Many thanks in advance. > > Ian McBurney > Design & Compliance Engineer. > > Allen & Heath Ltd. > Kernick Industrial Estate, > Penryn, Cornwall. TR10 9LU. UK > T: 01326 372070 > E: [email protected]<mailto:[email protected]> > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]<mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe)<http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]<mailto:[email protected]>> > Mike Cantwell <[email protected]<mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected]<mailto:[email protected]>> > David Heald <[email protected]<mailto:[email protected]>> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
