Mr. Gartman has posited questions similar to those I asked of this group over ten years past. The questions' context is the nut-and-bolts process to ensure regulatory compliance. From OP: "I am working on doing some bench-marking on what is necessary for a "model" regulatory compliance program. I am looking for more program information than product or country specific information. "
To do this you must already be 1. familiar with scoped standards. 2. familiar with available company resources 3. familiar with customer and industry expectations 4. familiar with meta-requirements Note that the 'Aberdeen' report is a meta-document. Brian From: LWA (Lei Wang) [mailto:[email protected]] Sent: Monday, January 20, 2014 7:57 PM To: [email protected] Subject: Re: [PSES] Regulatory Compliance program The Product Compliance Benchmark Report by Aberdeen Group: http://www.enginuityplm.com/ittrium/reference?path=A1x176x1y1x304x1x65y1x581x1x65y1x705x1x94y8x702x8x1 Although it is dated September 2006, the majority of the information can still be applicable. Lei Wang Senior Compliance Engineer Panduit Corp. 10500 W 167th St Orland Park, IL 60476 708-532-1800x86346 ________________________________________ From: Ken Wyatt <[email protected]> Sent: Monday, January 20, 2014 4:35 PM To: [email protected] Subject: Re: [PSES] Regulatory Compliance program Don't forget copies of the pertinent standards... _______________________ Kenneth Wyatt Wyatt Technical Services LLC 56 Aspen Dr. Woodland Park, CO Phone: (719) 310-5418 Email Me! | Web Site | Blog The EMC Blog (EDN) Subscribe to Newsletter Connect with me on LinkedIn On Jan 20, 2014, at 3:22 PM, Brian Oconnell <[email protected]> wrote: 1. Back issues of PSES monthly newsletter - in particular, articles by Rich Nute. 2. Presentations and papers from last 10 years of the ISPCE. 3. Articles and stuff found on web sites from MET, Nemko, TUVR, UL, etc. 4. Section General of your UL files. 5. LinkedIn stuff and the many regulatory/compliance blogs. 6. Alice's Adventures in Wonderland, Lewis Carrol. "Program information" is based on each corporation's internal 'theory' of regulatory compliance. And am somewhat certain that a large company such as TI has many megs of formal process stuff per ISO9001 program - go see your friendly compliance manager/senior engineer. Brian From: Gartman, W. Richard [mailto:[email protected]] Sent: Monday, January 20, 2014 12:49 PM To: [email protected] Subject: [PSES] Regulatory Compliance program PSES community, I am looking for white papers or presentations [that can be shared] related to regulatory compliance process for consumer electronics. I am working on doing some bench-marking on what is necessary for a "model" regulatory compliance program. I am looking for more program information than product or country specific information. All information is useful. Thank you in advance for your contributions. Regards W. Richard Gartman, MS, CSP Product Stewardship Manager Texas Instruments, Education Technology 13532 N Central Expressway, Dallas, TX 75243 1 Phone: 214-567-7927 P Email: [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
