David, Some safety labs will rely on the EMC test house to verify the applicable Clause 5 requirements from an EMC aspect. This was something I saw at times when I was working at an NRTL.
Josh From: itl-emc user group [mailto:[email protected]] Sent: Tuesday, March 04, 2014 11:36 PM To: [email protected] Subject: [External] [PSES] Testing to EN/IEC 60601-1-2 Hello, Looking for opinions concerning testing to EN/IEC 60601-1-2. Some customers want to perform partial testing only and for CE declare that their device meets the requirements of EN/IEC 60601-1-2. As a test lab, we recommend full testing. Any opinions. Also some of our customers insist that Clause 5 Identification, marking and documents, should be part of the test report. Any opinions concerning this. All responses welcome. Regards, David Shidlowsky | Technical Writer Address 1 Bat-Sheva St. POB 87, LOD 71100 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail [email protected]/[email protected]<mailto:[email protected]/[email protected]> Web www.itl.co.il<http://www.itl.co.il/> Fill out Customer Satisfaction Survey<http://app.sqm.co.il/SitePages/Questionnaire.aspx> Global Certifications You Can Trust - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
