On Fri, 28 Mar 2014 14:42:52 +0000, "Sundstrom, Mike" <[email protected]> wrote:
> I've been asked to find a supply that can provide the closed cell foam > material used in a EMC setup as a table for OATS or inside a chamber. > > Does anyone have any contacts? ETS Lindgren, and possibly some other manufacturers, supplis low dielectric tables which seems MOSTLY made from foam material: http://www.ets-lindgren.com/LDT We made our test table from cheaper and readily available Styrofoam boards. Regards, Tom -- Tomonori Sato <[email protected]> URL: http://homepage3.nifty.com/tsato/ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
