John, There's a chance that I will direct WG4 to resolve the national committee comments on the FDIS and go with a CDV, skipping the CD stage. But, you are correct in that there is not enough time left in the project to go the CDV/FDIS route, so an NP will be required. But, for CENELEC to state that CISPR I has abandoned CISPR 35 is a gross misstatement of the facts as I understand them.
Ghery S. Pettit -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: Sunday, June 08, 2014 1:44 PM To: [email protected] Subject: [PSES] CISPR 35/EN 55035 CENELEC has decided not to proceed with EN 55035, even under a new number. Curiously, there is a CENELEC report that says that CISPR/I has abandoned CISPR 35, but the IEC web site doesn't confirm that. It says that the FDIS failed and a CD will be discussed at the next meeting. But the project will run out of time unless an exception is granted (which might be sensible), so the project would revert to Stage Zero and need a New Work proposal before a new CD could be issued. It's extremely improbable that a New Work proposal would be voted down; everyone agrees that an immunity standard for multimedia is essential. So Stage Zero and NP voting would just add months to the process time, for no discernible reason. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk Quid faciamus nisi sit? John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
