Bob, Check out EMC32 from Rhode & Schwarz.
Jim __________________________ James L. Knighten, Ph.D. EMC Engineer Teradata Corporation 17095 Via Del Campo San Diego, CA 92127 858-485-2537 - phone 858-485-3788 - fax (unattended) From: Sykes, Bob [mailto:bob.sy...@gilbarco.com] Sent: Tuesday, August 05, 2014 7:32 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] EMI measurement software in OATS environment Worldly Experts, I am looking for recommendations/experiences relating to list based radiated emissions measurement software. This will be used in an OATS environment where trace based software does not work well due to ambient signals. I will be driving either a R&S or Keysight (aka Agilent) MXE receiver with ETS Lindgren tower/turntable. I am currently using HP85876 software, which is list based and works well at the OATS but I must "upgrade" when I replace my HP8546A. I am aware of TILE!, but are there others? adTHANKSvance, Bob Sykes Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net<mailto:emcp...@radiusnorth.net>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
