Ditto what David said. I also send out occasional tweets on EMC product design or pre-compliance measurements.
You’ll find me at @emc_guru. _______________________ Kenneth Wyatt Wyatt Technical Services, Inc. 56 Aspen Dr. Woodland Park, CO Phone: (719) 310-5418 Email Me! | Web Site | Blog The EMC Blog (EDN) Subscribe to Newsletter Connect with me on LinkedIn On Oct 10, 2014, at 2:11 AM, David Vye <[email protected]> wrote: > Sounds good Doug, > > I'll follow you. I tweet about simulation and product development for high > speed, RF, EMC and electromechanical design @EM_Sim_Biz > > Hopefully people find it a useful way to share info and connect with others > in the same business > > David > > Sent from my iPhone > >> On Oct 9, 2014, at 11:48 PM, Douglas Smith <[email protected]> wrote: >> >> Hi Everyone, >> I am going to try sending short "tweets" on electronic design and >> troubleshooting you may be interested in. If you want to see them, look at: >> @dougcsmith_ee on Twitter. It it proves useful to people I may permanently >> keep doing it. >> >> Just did a test posting. >> >> Doug >> -- University of Oxford Tutor Department for Continuing Education Oxford, >> Oxfordshire, United Kingdom >> -------------------------------------------------------------- ___ _ Doug >> Smith \ / ) P.O. Box 60941 ========= Boulder City, NV 89006-0941 _ / \ / \ _ >> TEL/FAX: 702-570-6108/570-6013 / /\ \ ] / /\ \ Mobile: 408-858-4528 | >> q-----() | o | Email: [email protected][1] \ _ / ] \ _ / Web: >> http://www.dsmith.org[2] >> -------------------------------------------------------------- >> >> --- Links --- >> 1 mailto:[email protected] >> 2 http://www.dsmith.org >> ------------------------------------------------------------------ >> To unsubscribe from si-list: >> [email protected] with 'unsubscribe' in the Subject field >> >> or to administer your membership from a web page, go to: >> http://www.freelists.org/webpage/si-list >> >> For help: >> [email protected] with 'help' in the Subject field >> >> >> List forum is accessible at: >> http://tech.groups.yahoo.com/group/si-list >> >> List archives are viewable at: >> http://www.freelists.org/archives/si-list >> >> Old (prior to June 6, 2001) list archives are viewable at: >> http://www.qsl.net/wb6tpu >> >> > ------------------------------------------------------------------ > To unsubscribe from si-list: > [email protected] with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > http://www.freelists.org/webpage/si-list > > For help: > [email protected] with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > http://www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
