Good point Brian. Also standard says portable cells and batteries. Does it mean that no IEC 62133 approval is required if battery is installed in fixed device, e.g. transmitter?
Best regards, Bostjan Boštjan Glavič Vodja laboratorija, Laboratorij za elektroniko Head of Laboratory, Laboratory of Electronic Engineering [SIQlogo60px] www.siq.si<http://www.siq.si/> SIQ Ljubljana, Trzaska c. 2, SI-1000 Ljubljana, Slovenia, VAT ID: SI23509678 t +386 (0)1 4778 265<tel:+386%20(0)1%204778%20265>, m +386 (0)41 391 283<tel:+386%20(0)41%20391%20283>, f +386 (0)1 4778 444<tel:+386%20(0)1%204778%20444> On 13. okt. 2014, at 19:22, "Brian Oconnell" <[email protected]<mailto:[email protected]>> wrote: Good People, Questions for members, or those that have contact with members, of TC108 and/or the North American STP. What is the intent of the last(A2) revision of 60950-1 for Li batteries? Is the requirement for battery assessment to IEC62133 intended just for batteries that are installed in the end-use equipment, or does it also extend to a stand-alone charger where that battery is subject to a 'temporary' insertion into a slot and is not permanently installed? Thanks, Brian - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher: <[email protected]<mailto:[email protected]>> David Heald: <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
