I’m not even talking about incorrect processes. I’m talking about lab setups that aren’t in compliance with the standards. Simple things like power supplied to the EUT via a cord connected “somewhere” under the turntable, rather than via a receptacle flush with and bonded to the ground plane as required in CISPR 22 5th and 6th Editions. Or labs that have C63.4 in their Scope of Accreditation who don’t have a way to vary the angle of the antenna (bore sighting, if you will). Neither an automatic mast or a way to manually change the angle. How did this get by the assessor? I’ve been told it’s a new requirement. Yup, new in 1991. Give me a break.
Ghery S. Pettit From: CR [mailto:[email protected]] Sent: Wednesday, December 17, 2014 7:49 PM To: [email protected] Subject: Re: [PSES] Brick power supplies and test errors (two topics) On 12/17/2014 5:55 PM, Pettit, Ghery wrote: Indeed. I’m glad to see that I’m not the only one seeing this. Ghery S. Pettit I've also looked over testers shoulders and seen things done wrong. Often it was because they didn't what was SUPPOSED to be done. We all learn from mistakes, eh? Cortland Richmond - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
