Have an aphorism for this that was derived from another common one (Shaw), that found its way into a product's installation instructions:
Do not argue with an AHJ, you will get dirty and the AHJ probably likes the dirt. Brian -----Original Message----- From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: Wednesday, April 15, 2015 9:30 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] 16 AWG wire usage In message <blupr02mb116aef4c518d40f7344d15dc1...@blupr02mb116.namprd02.prod.outlook .com>, dated Wed, 15 Apr 2015, Brian Oconnell <oconne...@tamuracorp.com> writes: >Article 430 should be referenced for this stuff. In general, overload >protection required for each branch circuit at the distribution panel. Less bother doing it that way, than arguing with the AHJ. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk When I turn my back on the sun, it's to look for a rainbow John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>