| All, I am attempting to build a spreadsheet application to help with estimating corona (partial discharge of electricity), early in the product design stage. I have a good understanding of the nonlinear responses resulting from electrode geometry, electrode spacing, applied voltage, air pressure and to some extent air temperature. The information I have available for air temperature ranges from -40C to +60C. My best sources of information comes from papers in aerospace and power distribution. My problem is that I cannot find reliable sources of information for air temperatures greater than +60C, preferably as high as +150C. My guess is that a simple extrapolation of my existing data will be completely wrong since some factors are exponential in nature. I am hopeful, that someone on this forum can point me to a resource to help. Thanks so much! Douglas E Powell http://www.linkedin.com/in/dougp01 ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ For help, send mail to the list administrators: For policy questions, send mail to: |
