During testing you are supposed to discharge EUT after each discharge using a ground wire, with an ionisation device
or with a permanent 2 x 470 K connection, dependent on the type of EUT and or test set up. Gert Gremmen ce-test From: Li Di [mailto:[email protected]] Sent: vrijdag 19 februari 2016 16:28 To: [email protected] Subject: [PSES] Electrostatic charge Buildup during ESD Testing Hi Sir, I have a question for ESD Testing. For some reason, the electrostatic charges shall build up on the EUT during the testing. The Buildup shall affect the performance of EUT or the testing itsself. How to evaluate the effectiveness of this Buildup of electrostatic charge? Is there someone studing this phenomena? Thank you very much. Best regards, ________________________________ Li Di Conorth Technologies Co., Ltd. ------------------------------------- Address: Room 212, Building C, No.15 Baiziwan Road, Chaoyang District, Beijing Tel (Fax): 0086-10-60530811 (Office) Mobile: 0086-13701332910 Email: [email protected] Website: www.conorthtech.com <http://www.conorthtech.com/> ------------------------------------------ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
