As long as the wires are positively retained by a second mechanical device, and the connection is not based on soldering only: yes.
Note that it may be more complex to pass on PE to a metal enclosure or other accessible part, without violating the contact metal-only pressure clause. Regards, Ing. Gert Gremmen Approvals manager ------------------------------------------------------------------------------------ + ce marking of electrical/electronic equipment + Independent Consultancy Services + Compliance Testing and Design for CE marking according to EC-directives: - Electro Magnetic Compatibility 2004/108/EC - Electrical Safety 2006/95/EC - Medical Devices 93/42/EC - Radio & Telecommunication Terminal Equipment 99/5/EC + Improvement of Product Quality and Reliability testing + Education Web: www.cetest.nl (English) Phone : +31 10 415 24 26 ------------------------------------------------------------------- This e-mail and any attachments thereto may contain information that is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your co-operation. From: Amund Westin [mailto:[email protected]] Sent: Friday 3 June 2016 09:18 To: [email protected] Subject: [PSES] IEC60950-1 - wiring terminals If you have a non-detachable power supply cord (1-phase plus PE), is it allowed to connect the wires directly by soldering to the internal pcb, or is a terminal block or similar necessary for connection? Regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
