Hello All According to ANSI 63.4: 2014 Clause 4.7.3 "Standard gain horns need not be periodically recalibrated, unless damage or deterioration is suspected or known to have occurred. If a standard gain horn is not periodically recalibrated, its critical dimensions (see IEEE Std 1309-2005) shall be verified and documented on an annual basis." Can anyone point me in the direction of the clause in IEEE Std 1309-2005 which mentions critical dimensions? Thanks in advance.
Regards, David Shidlowsky | Technical Reviewer Address 1 Bat-Sheva St. LOD 7120101 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail [email protected]<mailto:[email protected]>/[email protected] Web www.itl.co.il<http://www.itl.co.il/> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
