Hi All, I am looking for EMP protection or filter component. I searched the website and found no useful information for EMP protection of antenna port. I can find some special products for EMP or NEMP protection for power port. Could anyone give me some clues or advice for signal port? As I understand, it is a system level problem and many aspects must be considered (such as shielding, surge suppression, filter). Thank you very much!
Best regards, Li Di Conorth Technologies Co., Ltd. ----------------------------------- Address: Room 212, Building C, No.15 Baiziwan Road, Chaoyang District, Beijing Tel (Fax): 0086-10-60530811 (Office) Mobile: 0086-13701332910 Email: [email protected] Website: www.conorthtech.com ------------------------------------------ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
