A simple, undefined assertion is of no value. What is not correct?
 
With best wishes DESIGN IT IN! OOO – Own Opinions Only
 <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and 
Associates Rayleigh England
 
Sylvae in aeternum manent.
 
From: Charlie Blackham [mailto:char...@sulisconsultants.com] 
Sent: Tuesday, October 18, 2016 9:31 PM
To: John Woodgate <jmw1...@btinternet.com>; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] Working towards compliance as per the EN 55032
 
Your previous comment…..
 
>From: John Woodgate [mailto:jmw1...@btinternet.com] 
>Sent: 18 October 2016 18:24
>To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
>Subject: Re: [PSES] Working towards compliance as per the EN 55032
 
>Yes, the docopocoss for EN 55022 is 5 March 2017. Products leaving the factory 
>after that must meet EN 55032.
 
…was simple, but it wasn’t correct
 
Regards
Charlie
 
From: John Woodgate [mailto:jmw1...@btinternet.com] 
Sent: 18 October 2016 20:38
To: Charlie Blackham; EMC-PSTC@LISTSERV.IEEE.ORG 
<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: RE: [PSES] Working towards compliance as per the EN 55032
 
Mediaeval scholars used to answer any question by beginning with the Creation. 
I think that answers should be kept strictly simple and not explore the whole 
Universe.
 
With best wishes DESIGN IT IN! OOO – Own Opinions Only
 <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and 
Associates Rayleigh England
 
Sylvae in aeternum manent.
 
From: Charlie Blackham [mailto:char...@sulisconsultants.com] 
Sent: Tuesday, October 18, 2016 8:13 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: Re: [PSES] Working towards compliance as per the EN 55032
 
Rajneesh
 
Please note, compliance with EN 55032 is not “required” after March 2017 any 
more than EN 55022 is “required” now – it might be heavily recommended, but it 
is not “required”.
 
A Harmonised Standard:
*        Provides a presumption of Conformity with a Directive
*        Is what market enforcement authorities “expect to see” (and is what I 
would typically recommend that you apply)
 
The legal requirement is to comply with the Directive and the Directive does 
provide more than one way to do that.
 
The other thing to note, is that a presumption of conformity is obtained when a 
Harmonised Standard is “applied” and not “tested against”.
You may find that an analysis of your test set-up and results allow you to make 
a technical justification that the product meets 55032, so you can “apply” the 
new standard without necessarily having to re-test
 
The responsibility remains with the manufacturer and not with the test lab – 
they should be expert at testing, but it is the manufacturer who must 
demonstrate compliance with the Directive.
 
 
Regards
Charlie
 
From: Rajneesh Raveendran [mailto:000008500acb6cd4-dmarc-requ...@ieee.org] 
Sent: 18 October 2016 17:46
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: [PSES] Working towards compliance as per the EN 55032
 
Hi All
 
For all our new programs, we would be testing for compliance as per the EN 
55032 standard. But i have one question about some legacy products that we 
would continue to ship to our customers post March 2017. All these products 
have been tested as per the EN 55022 and if i am not wrong, there is no 
"grandfather clause" that provides any exemption. My question relates to 
whether all those products would now need to be tested as per EN 55032?
 
Regards,
Rajneesh
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > 
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > 
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) 
<http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > 
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > 

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>

Reply via email to