Hi Charlie,
I missed that in Annex II. Thank you!! John John Allen | President | Product Safety Consulting, Inc. Your Outsourced Compliance Department® http://www.productsafetyinc.com 630-238-0188 IEEE Product Safety Engineering Society - 2017 President elect IEEE Product Safety Engineering Society - Chicago Chapter Chair Keeping our members up to date and informed on Product Safety and Compliance https://ewh.ieee.org/soc/pses/index.html ________________________________ From: Charlie Blackham <[email protected]> Sent: Tuesday, November 1, 2016 4:40 PM To: John Allen; [email protected] Subject: RE: Authorised Representative John Annex II of the machinery directive requires The EC declaration of conformity must contain the following particulars: 1. ... 2. name and address of the person authorised to compile the technical file, who must be established in the Community; 3. ..... That may or may not be the manufacturer, but they must be in the EU. That's not the same thing as an "authorised representative" which is optional for the Machinery (and many other) Directive(s). Regards Charlie From: John Allen [mailto:[email protected]] Sent: 01 November 2016 19:32 To: [email protected] Subject: [PSES] Authorised Representative Hi, I always thought an Authorized Representative was required for Machinery but option for other Directives. I searched Machinery and LVD and only see manufacturer "or" authorised representative. If I'm wrong please point me to the particular section of the Directive. Thanks, John John Allen | President | Product Safety Consulting, Inc. Your Outsourced Compliance Department® http://www.productsafetyinc.com 630-238-0188 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
