Thank you very much. I have found it. With best wishes DESIGN IT IN! OOO Own Opinions Only www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England
Sylvae in aeternum manent. -----Original Message----- From: Andre Gomes Videira [mailto:[email protected]] Sent: Friday, November 18, 2016 12:06 PM To: [email protected] Subject: [PSES] RES: [PSES] Internal point of coupling Hello John, The definition is in IEC 61000-2-4. IEC 61800-3, which is the EMC standard for PDS, states that the IPC is defined in IEC 61000-2-4 as "In-Plant Point of Coupling". >From IEC 61000-2-4, item 3.1.7: IPC - "point on a network inside a system or an installation, electrically nearest to a particular load, at which other loads are, or could be, connected. Note: The IPC is usually the point for which electromagnetic compatibility is to be considered" André Gomes Videira Laboratório de Ensaios e Certificações Telefone: + 55 47 3276-7613 | Skype: agvideira WEG Drives & Controls - Automação Ltda. www.weg.net -----Mensagem original----- De: John Woodgate [mailto:[email protected]] Enviada em: sexta-feira, 18 de novembro de 2016 08:59 Para: [email protected] Assunto: [PSES] Internal point of coupling I am looking for a definition (preferably formal) of 'Internal point of coupling' for a proposed IEC Technical Report. It is not in Electropedia and is mentioned (as IPC) In IEC 61000-2-6 without definition. I am told that it might be defined in one of the IEC 61800 series standards, but there are several of them. With best wishes DESIGN IT IN! OOO - Own Opinions Only www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> Clique <a href="http://disclaimer.weg.net/"; target=_blank>aqui </a> caso você não seja o destinatário deste email, ou desejar conhecer nossa política de privacidade. Click <a href="http://disclaimer.weg.net/"; target=_blank>here </a> if you are not the intended recipient, or in case you want to know our privacy policy. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
