Our NRTL would use an applicable UL standard perhaps UL 1647 in this case for the primary listing and use NFPA 79 (if applicable) as a supplemental standard as part of the assessment and report file. I’ve just had one done recently similar using UL 508A and NFPA 79.
-Dave From: Pete Perkins [mailto:[email protected]] Sent: Tuesday, December 06, 2016 12:39 PM To: [email protected] Subject: Re: [PSES] US electrical safety standard for product tested to EN 60204? Curt, NFPA 79 is harmonized with EN 60204. The US differences are clearly spelled out. Unfortunately, NFPA 79 is not a standard that is used for product certification like many others – it is primarily used in field inspections to satisfy local AHJ inspection requirements. However, if you can show bridging from 60204 to NFPA 79 your product should be in essential compliance with the key issues of the US NEC. This should go a long way in showing compliance to any product standard that would apply to the product. You will need to be prepared to show the connection thru this chain to the certifying lab folks. You need to be prepared, however, to deal with details not covered in this overall approach from 60204 and the product might have to be modified to show full compliance. We can explore this more offline if you wish. :>) br, Pete Peter E Perkins, PE Principal Product Safety & Regulatory Affairs Consultant PO Box 23427 Tigard, ORe 97281-3427 503/452-1201 [email protected]<mailto:[email protected]> From: Curtis McNamara [mailto:[email protected]] Sent: Saturday, December 3, 2016 9:40 PM To: [email protected] Subject: [PSES] US electrical safety standard for product tested to EN 60204? Curious what list members would recommend. This is essentially and exercise machine, tested to a variety of NEN standards including 60204. I was asked to look at what might take for a US approval, and wondered what standard to start with. Thanks in advance! Curt - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
