Ralph,
Oooops... my fumble fingers typo error...
Try IEC 61204-7, Low-voltage switch mode power supplies - Part 7:
Safety requirements. Ed 2 is just coming out; the FDIS was voted in last fall.
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety & Regulatory Affairs Consultant
PO Box 23427
Tigard, ORe 97281-3427
503/452-1201
[email protected]
-----Original Message-----
From: Ralph McDiarmid [mailto:[email protected]]
Sent: Friday, February 3, 2017 8:54 AM
To: Pete Perkins <[email protected]>
Subject: RE: [PSES] safety standard - mobile inverters
Hi Pete, the IEC webstore say this:
IEC 61207-7:2013
Expression of performance of gas analyzers - Part 7: Tuneable semiconductor
laser gas analyzers
?
Ralph McDiarmid
Product Compliance
Engineering
Solar Business
Schneider Electric
-----Original Message-----
From: Pete Perkins [mailto:[email protected]]
Sent: Thursday, February 02, 2017 8:08 AM
To: [email protected]
Subject: Re: [PSES] safety standard - mobile inverters
Ralph, et al,
Thanx to Bostjan for this reference.
IEC 62477-1 Safety requirements for power electronic converter systems
and equipment - Part 1: General.
Or
IEC 61207-7 Ed 2 (based upon 62477-1) Low-voltage switch mode power
supplies - Part 7: Safety requirements (which had been based upon 60950 but has
been redirected a 62477-1 basis). This should better fit your product rather
than the General requirements.
If you are still considering 60950 you should focus on 62368 which is
replacing the obsolescent requirements of 60950.
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety & Regulatory Affairs Consultant PO Box 23427 Tigard,
ORe 97281-3427
503/452-1201
[email protected]
-----Original Message-----
From: Boštjan Glavič [mailto:[email protected]]
Sent: Thursday, February 2, 2017 1:45 AM
To: [email protected]
Subject: Re: [PSES] safety standard - mobile inverters
What about IEC 62477-1: Safety requirements for power electronic converter
systems and equipment - Part 1: General
With kind regards,
Boštjan Glavič
Head of Laboratory
Safety and Electromagnetics
phone +386 1 4778 265
SIQ Ljubljana - Trzaska cesta 2 - 1000 Ljubljana - Slovenia - www.siq.si
From: Adam Dixon [mailto:[email protected]]
Sent: Thursday, February 2, 2017 10:03 AM
To: [email protected]
Subject: Re: [PSES] safety standard - mobile inverters
What about IEC 62109-2 with emphasis on standalone (i.e. not grid-connected)?
Regards,
Adam in Atlanta
[email protected]
IEC 62109-2:2011
Safety of power converters for use in photovoltaic power systems - Part 2:
Particular requirements for inverters
On Thu, Feb 2, 2017 at 2:31 AM, John Woodgate <[email protected]> wrote:
I don't think there is one. A search on the IEC web site shows IEC
61204-7:2016, which is not about inverters but might be sufficiently applicable.
With best wishes DESIGN IT IN! OOO – Own Opinions Only www.jmwa.demon.co.uk J M
Woodgate and Associates Rayleigh England
Sylvae in aeternum manent.
-----Original Message-----
From: Ralph McDiarmid [mailto:[email protected]]
Sent: Wednesday, February 1, 2017 7:37 PM
To: [email protected]
Subject: Re: [PSES] safety standard - mobile inverters
Dear group,
I am looking for suggestions on best-fit product safety standard for LVD for a
230V inverter intended for vehicular use only. (buses & small trucks)
Test lab suggests EN60950, which I dismissed. EN50178 and EN60335-1 don’t
appear to be suitable. I’m really looking for an IEC equivalent to UL458
Thanks,
Ralph McDiarmid
Product Compliance
Engineering
Solar Business
Schneider Electric
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]> All emc-pstc postings are archived and searchable on the
web at: http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
