Dear colleagues, I could use your help determining scope of test standards for a handheld software service tool, used for checking and updating engine and hydraulic/electronic system controller software on off-highway earth moving machinery.
The tool connects to the machine via CAN bus port or RS-232 serial port, with a single cable (less than 1ft long). The tool contains a BT module and must be paired with an iPhone in order to perform its function. The tool provides the interface to the vehicle, and the customer provided iPhone serves up software and displays controller status. The tool draws power only when plugged into the vehicle port (a 9V alkaline battery provides backup memory power). Vehicle engine is never running when tool in plugged in (accessory position, only). *Can I apply the RED and reasonable environmental testing to IEC 60529 and call it good? *What environmental testing should be considered? The device will "only" be used in service and repair environments at global dealerships, so I don't anticipate designing much beyond what an automotive OBD scan tool might need, and for good reliability. *Is there an appropriate immunity family standard I should be considering? High immunity to ESD & radiated sources seems appropriate... *Because the tool is not actually usable or "complete" until paired with an iPhone, how does the RED apply, besides the fact that the tool contains a BT radio? (I'm expecting an "all" means "all" answer ...) Thank you in advance, Chet Summers This email and any files transmitted with it from Charles Machine Works are confidential and intended solely for the use of the individual or entity to which they are addressed. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
