The slow decay was more intended to make the meter easier to read. There have been some other colourful explanations, but I think that’s the simplest. With best wishes DESIGN IT IN! OOO – Own Opinions Only <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. From: Doug Powell [mailto:[email protected]] Sent: 31 July 2017 16:19 To: John Woodgate <[email protected]>; EMC-PSTC <[email protected]> Subject: Re: [PSES] Quasipeak definition As I understand it differs from the peak and average in that it is a quick detect and slow decay. The purpose was to emulate electronic devices that are sensitive to this sort of response. As such, we use to peak to detect potential interference and then a combination of average and QP for pass/fail determination. All the best Doug
From: [email protected] <mailto:[email protected]> Sent: July 31, 2017 8:40 AM To: [email protected] <mailto:[email protected]> Reply-to: [email protected] <mailto:[email protected]> Subject: Re: [PSES] Quasipeak definition It’s a peak detector that has a carefully-controlled time-response that is not quite fast enough to show the true peak value of a very fast transient that might occur. With best wishes DESIGN IT IN! OOO – Own Opinions Only <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. From: Paasche, Dieter [mailto:[email protected]] Sent: 31 July 2017 15:35 To: [email protected] <mailto:[email protected]> Subject: [PSES] Quasipeak definition How would you define the Quasipeak detector to somebody that is not EMC knowledgeable. Sincerely, Dieter Paasche Senior Product Developer, Electrical CHRISTIE 809 Wellington Street North Kitchener, ON N2G 4Y7 Phone: 519-744-8005 ext.7211 <http://www.christiedigital.com/> www.christiedigital.com This e-mail message (including attachments, if any) is confidential. Any unauthorized use, distribution or disclosure is prohibited. If you have received this e-mail message in error, please notify the sender by reply e-mail or telephone and delete it and any attachments from your computer system and records. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:[email protected]> [email protected]> All emc-pstc postings are archived and searchable on the web at: <http://www.ieee-pses.org/emc-pstc.html> http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/ Instructions: <http://www.ieee-pses.org/list.html> http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < <mailto:[email protected]> [email protected]> Mike Cantwell < <mailto:[email protected]> [email protected]> For policy questions, send mail to: Jim Bacher < <mailto:[email protected]> [email protected]> David Heald < <mailto:[email protected]> [email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:[email protected]> [email protected]> All emc-pstc postings are archived and searchable on the web at: <http://www.ieee-pses.org/emc-pstc.html> http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/ Instructions: <http://www.ieee-pses.org/list.html> http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < <mailto:[email protected]> [email protected]> Mike Cantwell < <mailto:[email protected]> [email protected]> For policy questions, send mail to: Jim Bacher < <mailto:[email protected]> [email protected]> David Heald < <mailto:[email protected]> [email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
