Hi Vincent:
You asked: 1) May I know where can one has access to IEC 62368-1 3ed, Final Draft International Standard (FDIS) ? Ask your national committee to IEC TC108 for this document. 2) What are the major differences between IEC 62368-1 3ed and 2nd editions ? I don’t believe there is a document that identifies the major differences. Your national committee may have a marked-up document that shows the changes between 2nd and 3rd editions. You will have to decide which of the changes are “major.” 3) Is Sub-clause 4.1.1 on uses of IEC 60950/60065 Components still allowed in IEC 62368-1 3ed ? Yes. Best regards, Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>