In a radio system, the will be several devices as the antenna, amplifiers, frequency tuners, splitters and at the end a modem.
A modem, which will be placed deep in the block chain of the radio system, does it apply for RED? It's not connected directly to an antenna and not transmitting / receiving on the system frequency. RED guide Chapter 1.6.3.6 mentions different items that is connected to an antenna, but the modem is not, it is placed further into the system. But if RED apply, how can you test according to a "radio system" RED standard when your modem is not transmitting on that system frequency? Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
