All,
There is one serious problem with in-situ testing to EN 55035. What regulator is going to allow you to perform radiated immunity testing from 80 MHz to 1 GHz at 3 V/m out in the open? And at certain spot frequencies above that to as much as 30 V/m? I suspect that this would be a roadblock to any such proposed testing. Ghery S. Pettit From: John Woodgate <[email protected]> Sent: Wednesday, July 18, 2018 12:19 AM To: [email protected] Subject: Re: [PSES] EN 55035/35 If you could set up a reasonable test scheme, you could use EN 55035 for in-situ. Listings in the OJ are held up for legal reasons; the situation is quite complex but has recently been discussed in this forum. John Woodgate OOO-Own Opinions Only J M Woodgate and Associates www.woodjohn.uk <http://www.woodjohn.uk> Rayleigh, Essex UK On 2018-07-18 06:49, itl-emc user group wrote: Hello EN 55032/CISPR 32 state in their scope that " In-situ testing is outside the scope of this publication." EN 55035/CISPR 35 make no mention of in-situ. Any thoughts on EN 55035/CISPR 35 being applicable to in-situ testing? Also, EN 55035 appears in the RED list of harmonized standards. Any thoughts about applying it to MME for the EMCD since no EMCD list of harmonized standards has been published since August 2018. All opinions will be welcome. Regards, David Shidlowsky| Technical Reviewer Address 1 Bat-Sheva St. LOD 7120101 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail : <mailto:[email protected]> [email protected]/ <mailto:[email protected]> [email protected]/[email protected] Web <http://www.itlglobal.org> www.itlglobal.org <http://app.sqm.co.il/SitePages/Questionnaire.aspx> Fill out Customer Satisfaction Survey Global Certifications You Can Trust This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return by forwarding the message and its attachments to the sender. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
