It seems to me that in addition to the MD, you may need to look at any vehicular issues. Depending on the engine type possibly batteries, fuels, etc. The term forklift may not work and instead try lift truck.
I would be curious to see what you finally decide. Thanks, Doug ----------------------------- Werner Heisenberg, Kurt Gödel, and Noam Chomsky walk into a bar. Heisenberg turns to the other two and says, “Clearly this is a joke, but how can we figure out if it’s funny or not?” Gödel replies, “We can’t know that because we’re inside the joke.” Chomsky says, “Of course it’s funny. You’re just telling it wrong.” On Thu, Aug 2, 2018 at 8:08 AM Mike Sherman <[email protected]> wrote: > Pete -- > > Things to consider: > 1. Section 3 of Annex I of the Machinery Safety Directive. > > 2. There may be some Type C EN standards that are applicable, or from > which you could glean some useful requirements. > > 3. Product might be out of scope of RoHS directive, if it meets the > definition of professional off road mobile machinery. See Guideline to the > RoHS directive for the finer points of this. > > Mike Sherman > Graco Inc. > > ------------------------------ > *From: *"Pete Perkins" <[email protected]> > *To: *"EMC-PSTC" <[email protected]> > *Sent: *Thursday, August 2, 2018 7:28:39 AM > *Subject: *[PSES] CE marking of machinery that moves about > > Colleagues, I’ve been dealing with CE marking of machinery for > some time but now am interested in a variation on that theme, machinery > that moves. Think of a fork-lift or front loader each of which lifts a > load and moves it before setting it down again. What additional > requirements are placed upon such a machine. > > > > :>) br, Pete > > > > Peter E Perkins, PE > > Principal Product Safety & Regulatory Affairs Consultant > > PO Box 23427 > > Tigard, ORe 97281-3427 > > > > 503/452-1201 > > > > IEEE Life Fellow > > [email protected] > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > -- Douglas E Powell [email protected] http://www.linkedin.com/in/dougp01 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
