Pete,
I assume you are speaking about a device that would be using an FCC ID. Grantee Codes specifically don't use "1" ones or "0" zeros so that there is not confusion with capital I or letter o, however there is no restriction on what is used in the product code. To answer your question, if you look on this FCC ID help page, there are no examples of zero's with a line through them. https://www.fcc.gov/oet/ea/fccid#helpSection Larry From: Pete Perkins [mailto:[email protected]] Sent: Monday, December 10, 2018 7:47 PM To: [email protected] Subject: [PSES] product marking detail for FCC marking Speak O oracle: My client is getting pushed by their Euro based EMC lab that when marking a product in compliance with FCC regulations that when the number contains a numeric zero to use a zero with a slash rather than the zero provided on the North American keyboard. The NA keyboard clearly distinguishes between alpha O and numeric 0 by shape. I've not seen this done on any products here and don't believe that it is commonly done by American manufacturers. Wot's the group experience and feedback on this? :>) br, Pete Peter E Perkins, PE Principal Product Safety & Regulatory Affairs Consultant PO Box 23427 Tigard, ORe 97281-3427 503/452-1201 IEEE Life Fellow [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
