It is obviously jistvair discharge only. I suspect this is from the 70s, maybe earlier. The output rise time will be slow further indicating a very early design when they thought ESD had a ten ns risetime.
Doug Sent from my iPhone IPhone: 408-858-4528 Office: 702-570-6108 Email: [email protected] Website: http://dsmith.org ________________________________ From: Richard Georgerian <[email protected]> Sent: Sunday, February 17, 2019 20:11 To: [email protected] Subject: [PSES] ESD network schematic Greeting colleagues, I am trying to find out what standard or document the below ESD discharge network/ESD gun circuit comes from. It does not appear to come from either IEC 61000-4-2 or the MIL Standard. The Rs and Cs are the discharge network for a specific ESD waveform. The LS looks like the internal inductance of the ESD gun; the CH looks like the capacitance (maybe the parasitic capacitance of the ESD gun). The LH looks like the inductance of the ESD tip and the RH looks like the limiting resistor that is part of the ESD tip circuit. I cannot put a date as to when this schematic was made, so it could be something recent or from many years ago. [cid:[email protected]] Thank-you, Richard Georgerian Applications Engineer - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
