Hi Dave,Thank you for your response. Product is light industrial laboratory equipment and market is US, europe, asia, korea. Trying to figure out which entities I contact for CoC, CE Mark, etc. Tried searching online for a good sources to use as information I can feed back to team, but havent had success yet.Sent via the Samsung Galaxy S8, an AT&T 5G Evolution capable smartphone -------- Original message --------From: "Nyffenegger, Dave" <[email protected]> Date: 5/9/19 10:43 (GMT-08:00) To: Frank Tang <[email protected]>, [email protected] Subject: RE: [PSES] EMC and safety basics (process documentation)
Frank, Answer to many these questions depend on what market(s) you are selling into. Your test lab will provide you with their prerequisites needed for a given test/certification. These should be identified in their quotes. Generally minimum requirements for safety evaluation/certifications are critical components list with all component info, schematics, and safety risk assessment. Your NRTL will dictate some of this for the NA market. The ‘Blue Guide’ on the implementation of EU product rules will help answer questions on what you need to do with your documentation and certifications for the EU market. The EU directives themselves define some of the documentation requirements for the individual directives. -Dave From: Frank Tang [mailto:[email protected]] Sent: Thursday, May 09, 2019 12:53 PM To: [email protected] Subject: [PSES] EMC and safety basics (process documentation) Hi Everyone, Looking for some guidance and mentoring because I am currently in charge of compliance and regulatory division on my own. Any knowledge provided will be greatly appreciated. Have some knowledge on process for EMC testing, but need guidance for, What to do after test complete and have test report in hand documentation application for certificate (?) self declaration, etc. Maintaining certification Would also like to get some information regarding safety documentation as well, Things to provide test lab before testing BOM (?) schematic LoCC What to do after test conclude with report in hand Documentation process, LVD Machinery directive etc -- Thank you and best regards. - Frank - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
