Amund, So I have tried to work this the other way. I go to a
test house that is both a NRTL approved and can provide CB reports for the
product. This has worked well for my clients for many years.
Technically the CB Report should have all of the needed
evaluation and test results for equipment which is evaluated to harmonized
standards (eg 60950 & 61010) however the CB report should have included
investigation to the NCs for Canada (in this case).
From discussions among colleagues it is clear that CB Reports
provided to another test house are not all accepted in the same way. Each test
house has to cultivate a very good reputation for the reports to be completely
interchangeable between test houses.
Altho it’s none of our business here which test house you have
used, you’ll have to work thru some of these issues if there are questions
about converting the CB Report to a CSA Report (or any other National safety
report) with CSA itself.
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety & Regulatory Affairs Consultant
PO Box 1067
Albany, Ore 97321-0413
503/452-1201
IEEE Life Fellow
<mailto:[email protected]> [email protected]
Entropy ain’t what it used to be
From: Amund Westin <[email protected]>
Sent: Friday, June 14, 2019 1:14 AM
To: [email protected]
Subject: [PSES] Safety test for CSA approval
Is it possible to carry out a safety test (IEC62368-1) at a CB listed test
laboratory, and thereafter bring the CB test report forward to CSA Group for a
CSA certification?
Anyone who have followed this route with success or do CSA required to do the
testing as well?
BR
Amund
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <mailto:[email protected]> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected] <mailto:[email protected]> >
Mike Cantwell <[email protected] <mailto:[email protected]> >
For policy questions, send mail to:
Jim Bacher <[email protected] <mailto:[email protected]> >
David Heald <[email protected] <mailto:[email protected]> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
