A quick and dirty way to find the center of gravity is to hang the product from each of the four corners on top, one at a time. For example from lifting rings or similar. The imaginary vertical lines that passes through the product should all intersect at the COG. Similarly, you could simply tilt up to the balance point on all four edges and the four imaginary vertical planes will intersect at the COG.
-Doug Douglas E Powell Laporte, Colorado USA [email protected] http://www.linkedin.com/in/dougp01 On Fri, Jul 5, 2019 at 7:00 AM frankt_cpmt < [email protected]> wrote: > Hi Everyone, > I have been searching and drawing blanks for test labs in the bay area > capable of performing tilt stability and measuring center of gravity in bay > area California, San Jose, Fremont, Santa Clara, Sunnyvale, etc. > Is there a lab or facility someone in this community uses to perform such > testing and measurements for large scale equipments, 5 feet (w)× 6 feet > (l)× 7.5 feet (h)? > > > > Sent via the Samsung Galaxy S8, an AT&T 5G Evolution capable smartphone > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > -- Douglas E Powell [email protected] http://www.linkedin.com/in/dougp01 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
