John,

Thanks for your advice!  When will we use the National Forward?  After
Brexit, the European Forward may not exist in BS standard, will the
National Forward take place instead?

Best regards,

Scott


On Wed, 11 Sep 2019 at 00:41, John Woodgate <j...@woodjohn.uk> wrote:

> It is not a correct interpretation of 'no transition period'. The European
> Foreword is correct, except that in rare cases, the European Commission
> sets a different date from that set by CENELEC, in which case the
> Commission's date applies.
>
> Your last sentence is correct. Docopocoss rules!
>
> Best wishes
> John Woodgate OOO-Own Opinions Only
> J M Woodgate and Associates www.woodjohn.uk
> Rayleigh, Essex UK
>
> On 2019-09-10 17:15, Scott Xe wrote:
>
> I have a query about the transition period in BS EN standard and seeking
> advice how to correctly interpret the transition period based on the EU
> normal application.
>
>
> For example of BS EN 60086-4 2019
>
>
>
> In European Forward of the standard, the dop is 2020-02-28 and dow
> 2022-05-30.  Transition period is 32 months for adopting both old and new
> standards in parallel.  The revised standard must be published no later
> than 2020-02-28 and the deadline to replace the old standard with the new
> one is 2022-05-30.
>
>
>
> In National Forward of BS EN IEC standard, BS EN IEC 60086-4 2019
> supersedes BS EN 60086-04 2015, which is withdrawn.  In the UK, the old
> standard is replaced with the new standard as soon as it is published.  Is
> it a correct interpretation of no transition period?  It seems to be not in
> line with above European level and below harmonized standards which both
> have transition periods.  In addition, the implementation dates may vary by
> each member state of EU causing unnecessary confusion.
>
>
>
> For harmonized standards, we have to follow the first publication OJ and
> Date of cessation of presumption of conformity of superseded standard in
> OJEU regardless of above application dates in standard.
>
>
> Thanks and regards,
>
>
> Scott
>
>
>
>
>
>> -
> ----------------------------------------------------------------
>
> This message is from the IEEE Product Safety Engineering Society emc-pstc
> discussion list. To post a message to the list, send your e-mail to <
> emc-p...@ieee.org>
>
> All emc-pstc postings are archived and searchable on the web at:
> http://www.ieee-pses.org/emc-pstc.html
>
> Attachments are not permitted but the IEEE PSES Online Communities site at
> http://product-compliance.oc.ieee.org/ can be used for graphics (in
> well-used formats), large files, etc.
>
> Website: http://www.ieee-pses.org/
> Instructions: http://www.ieee-pses.org/list.html (including how to
> unsubscribe) <http://www.ieee-pses.org/list.html>
> List rules: http://www.ieee-pses.org/listrules.html
>
> For help, send mail to the list administrators:
> Scott Douglas <sdoug...@ieee.org>
> Mike Cantwell <mcantw...@ieee.org>
>
> For policy questions, send mail to:
> Jim Bacher <j.bac...@ieee.org>
> David Heald <dhe...@gmail.com>
>
>

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>

Reply via email to