You are asking about classified documents which must be obtained through official channels.This of course means you will need to be checked for clearance. I would likely begin here, https://nato.usmission.gov/
Best, Doug On Wed, Feb 5, 2020, 5:17 AM <[email protected]> wrote: > Hello, > > > > does anybody a source or website where I can get the following standards: > > > > - *AD 80-83*, Allied Command Operations (Aco) Electronic Warfare > (EW) Protection Joint Restricted Frequency List (JRFL) (NATO Restricted, to > be acquired through National Authorities by the Supplier) > > - *SDIP 27/2* (NATO Confidential, to be acquired through National > Authorities by the Supplier) > > - *SDIP 29/2* (NATO Restricted, to be acquired through National > Authorities by the Supplier) > > > > > > Best reagards > > > > Dipl.-Ing. (FH) Michael Loerzer > > *__* *__* *__* *__* > > > > *Regulatory Affairs Specialist * > > *Managing Director* > *GLOBALNORM* > > Fon +49 30 3229027-51 > > Fax +49 30 3229027-59 > > [email protected] > > » globalnorm.de > <https://www.globalnorm.de/?pk_campaign=Signatur&pk_content=Link> > > *__** GLOBALNORM STANDARDS * *____* > > > > > > *Produktkonformität effizienter gestaltenGLOBALnorm – unser Tool für > Normenmanagement» Jetzt über alle Vorteile informieren! > <https://standards.globalnorm.de/normenmanagementsystem-globalnorm.html?pk_campaign=signatur&pk_content=unten>* > > > > > > Globalnorm GmbH | Sitz der Gesellschaft: Kurfürstenstraße 112, 10787 > Berlin | Geschäftsführer: Dipl.-Ing. (FH) Michael Loerzer | Amtsgericht > Berlin-Charlottenburg HRB 105204 B | USt-ID-Nummer: DE251654448 > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
