Dear Pete, For set-up a new LV Safety Lab can be used ch.14 from "Electrical Product Compliance and Safety Engineering" book - Artech House 2017. Also for training the above book can be useful. Best Regards, Steli
Steli Loznen, M.Sc., SM-IEEE VP for Technical Activities and Member of BoG IEEE-PSES Convener IEC 62A/MT29+MT 62354 17-3 Shaul HaMelech Blvd. Tel Aviv 6436719 Israel Tel:+972-3-6912668 Fax:+972-3-6913988 Mobile:+972-54-4818816 e-mail: [email protected] From: Pete Perkins <[email protected]> Sent: Tuesday, February 25, 2020 8:02 PM To: [email protected] Subject: [PSES] Setting up a LV lab safety training and requirements What's a good source for Lab safety requirements and training when setting up a new Low voltage (up to 600V) lab for a new US company? :>) br, Pete Peter E Perkins, PE Principal Product Safety & Regulatory Affairs Consultant PO Box 1067 Albany, ORe 97321-0413 503/452-1201 IEEE Life Fellow IEEE PSES 2020 Distinguished Lecturer [email protected]<mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
